Basic Information

Abstract Number: 290 - 3
Author Name: Nathan S Lewis - Caltech
Session Title: SEAC - Nano-Electroanalysis for a Sustainable World
Event Type: Symposia
Event Title: Sunlight-Driven Hydrogen Formation by Membrane-Supported Photoelectrochemical Water Splitting

Presider Name:Joaquin Rodriguez Lopez
Affiliation:University of Illinois

Date: Monday, March 7, 2016
Start Time: 09:10 AM (Slot #3)
Location: B310

Abstract Content

We are developing an artificial photosynthetic system that utilizes sunlight and water as input and produces hydrogen and oxygen as the outputs. We are taking a modular, parallel development approach in which three distinct primary components-the photoanode, the photocathode, and the product-separating but ion-conducting membrane-are fabricated and optimized separately before assembly into a complete water-splitting system. Design principles incorporate two separate, photosensitive semiconductor/liquid junctions that will collectively generate the 1.7-1.9 V at open circuit necessary to support both the oxidation of H[sub]2[/sub]O (or OH[sup]-[/sup]) and the reduction of H[sup]+[/sup] (or H[sub]2[/sub]O). The photoanode and photocathode will consist of rod-like semiconductor components, with attached heterogeneous multi-electron transfer catalysts, which are needed to drive oxidation or reduction reactions at low overpotentials. The high aspect-ratio semiconductor rod electrode architecture allows for use of low cost, earth abundant materials without sacrificing energy conversion efficiency due to orthogonalization of light absorption and charge-carrier collection. Additionally, the high surface-area design of the rod-based semiconductor array electrode inherently lowers the flux of charge carriers over the rod array surface relative to the projected geometric surface of the photoelectrode, thus lowering the photocurrent density at the solid/liquid junction and thereby relaxing demands on the activity (and cost) of any electrocatalysts. A flexible composite polymer film will allow for electron and ion conduction between the photoanode and photocathode while simultaneously preventing mixing of the gaseous products. Separate polymeric materials will be used to make electrical contact between the anode and cathode, and also to provide structural support. Interspersed patches of an ion conducting polymer will maintain charge balance between the two half-cells.